Text Us

    PEX vs. Copper for Repiping a House

    Both are allowed by South Carolina's residential code for the water lines inside a house, and both last when they're installed right. The differences that matter here are how each handles our water, sunlight, freezing and the work of getting new pipe into an old house.

    By Frontline Plumbing · Updated

    What the code allows

    South Carolina's residential code (the 2021 International Residential Code as the state adopted it) lists the pipe that can carry water inside a house. Copper tubing (Types K, L and M among others), PEX made to ASTM F876 or CSA B137.5, and CPVC are all on the list. Every one of them has to meet NSF 61 for drinking water and carry a pressure rating of at least 100 psi at 180°F.

    So the choice isn't about what's legal; it's about the house.

    Chlorine, chloramine and PEX

    Utilities disinfect water, and Greer CPW uses chloramine. The Plastics Pipe Institute says PEX for drinking water must have a minimum extrapolated life of 50 years when tested for chlorine resistance under ASTM F2023, and that chloramines are less aggressive to PEX than free chlorine.

    The first digit of PEX's material designation code tells you how much hot water it's rated for. A 1 is tested for hot water at 140°F up to 6 hours a day, typical home use. A 3 covers up to 12 hours a day, timed recirculation. A 5 covers continuous recirculation, around the clock. If you're adding a recirculation pump that runs all day, that digit matters.

    Sunlight and outdoors

    PEX doesn't like the sun. The Plastics Pipe Institute says it shouldn't be installed outdoors unless it's buried or protected from UV, and drinking-water PEX only has to pass a minimum of one month of UV exposure in testing. Inside walls and underground, that isn't an issue; where it will see daylight, even indirect light like an unfinished basement's, it gets a UV-blocking sleeve or insulation, and an exposed outdoor run gets protected or a different pipe.

    Freezing

    In Clemson Extension's calculated freeze table (half-inch pipe, half an inch of insulation, 5 mph wind, 5°F, no flow), copper froze solid fastest: 2.9 hours, against 4.1 for PVC and 4.3 for galvanized. The table doesn't include PEX. Whatever the pipe, the protection is the same: keep it out of the cold or keep water moving. See our guide to frozen pipes in the Upstate.

    Why we repipe in PEX

    PEX is flexible tubing. We repipe whole houses in PEX, from one-bath homes to three-bath, and when a section of old copper fails, we reroute that branch in PEX. In a Greenville crawl space, a cracked CPVC line feeding an outdoor spigot came out and PEX went in.

    Copper still has its place. On our water tap jobs, the utility-side connection is Type K copper, and the code lists copper for water service as well as inside the house.

    Common Questions

    Yes. South Carolina's residential code lists PEX made to ASTM F876 or CSA B137.5 for water distribution in a house, along with copper and CPVC.

    Water distribution pipe has to meet NSF 61 for drinking water under the code, and the Plastics Pipe Institute says drinking-water PEX must pass a 50-year extrapolated chlorine resistance test.

    The Plastics Pipe Institute says chloramines are less aggressive to PEX than free chlorine. The first digit of the PEX material designation code shows how much hot water exposure it's rated for.

    Only buried or protected from sunlight. The Plastics Pipe Institute says PEX shouldn't be installed outdoors without UV protection.

    Not if the copper is sound. Repipe when leaks keep coming back in different places, or when the house still has old galvanized or polybutylene supply lines.

    Want a plumber to look at yours?

    Frontline Plumbing is a veteran-owned plumber in Greer, SC, working across the Upstate.

    More Guides