Text Us
    Back to Home

    Well Pressure Tank Replacement in Greer, SC

    If your well pump kicks on and off every few seconds, or the pressure surges and sags, the pressure tank is the first suspect. We replace well pressure tanks, switches, gauges and tank fittings, and set the system up so the pump isn't working itself to death.

    Well Pressure Tank Replacement

    About This Service

    A pressure tank stores water under pressure so the pump doesn't have to start every time you open a faucet. Most modern well tanks are precharged with a diaphragm or bladder: air on one side, water on the other. When the tank loses its air charge, or the diaphragm fails and the tank fills with water, the pump starts and stops in rapid bursts. Goulds calls that short cycling. The whole point of the tank, in Goulds' words, is longer component life from fewer pump cycles, and short cycling throws that away.

    Setting a tank up right is specific. Amtrol and Goulds both say the tank's air precharge should be about 2 psi below the pressure at which the pump turns on, so a 40/60 system gets a 38 psi precharge, and that it should only be checked or adjusted with the tank empty and the system off. Amtrol also warns that a tank that keeps losing air may be corroding inside, and that adding air to a tank like that can make it burst, so it gets checked by a professional, not pumped back up. Goulds says a leaking tank should be replaced.

    We replace small and large pressure tanks, rebuild the tank tee and manifold, replace pressure switches, gauges, relief valves and check valves, service the air charge, and replace constant-pressure controllers on variable-speed systems. Freezing weather is the other enemy of well equipment: Amtrol says a tank shouldn't be exposed to temperatures below freezing at all, because water freezing in the system will break it, so a tank in an unheated well house needs protection.

    Signs You May Need Well Pressure Tank Replacement

    • The pump turns on and off every few seconds when water runs
    • Pressure that surges and drops at the faucet
    • Water spitting from the air valve on top of the tank
    • A tank that's rusted, sweating or leaking
    • The tank sounds or feels full of water when you knock on the top
    • The pressure gauge reads wrong or doesn't move

    What's Included

    • Well pressure system diagnosis
    • Pressure tank replacement, small to large
    • Tank air-charge check and service
    • Pressure switch and pressure gauge replacement
    • Tank tee and manifold rebuild
    • Check valve and relief valve replacement
    • Constant-pressure controller replacement

    Why Choose Us

    • Precharge and switch set the way the tank maker specifies
    • We fix the cycling before it ruins the pump
    • Licensed in South Carolina and North Carolina
    • Veteran-owned local plumber in Greer

    Well Pressure Tank Replacement FAQ

    The pump turning on and off in quick bursts (short cycling) is the main sign. A tank that's waterlogged, leaking or keeps losing its air charge is another. Amtrol notes that steady air loss can mean the tank is corroding inside.

    About 2 psi below the pump's cut-in pressure, per Amtrol (Goulds says 2 to 3): 38 psi for a 40/60 switch, 28 psi for a 30/50. It's checked with the tank drained and the system off. If the tank has been losing air, don't just add more: Amtrol warns air loss can mean internal corrosion, and re-pressurizing a corroded tank can make it burst.

    On most modern precharged tanks, no. Goulds describes its tanks' diaphragm as sealed in place, and says a leaking tank should be replaced by a qualified professional. Amtrol warns that steady air loss can mean internal corrosion.

    Yes. Every start is wear on the pump and switch, and cycling every few seconds adds up fast. Fixing the tank protects the pump. Call 864-279-4461.

    Well Pressure Tank Replacement Near You

    We provide well pressure tank replacement to homeowners and businesses across the Upstate SC area. Select your city to see local service info.

    Ready to get started?

    Call us now or request a free quote — we respond within minutes.

    864-279-4461