Text Us
    Back to Home

    Running Toilet Repair in Greer, SC

    A toilet that keeps running, or refills by itself every few minutes, is wasting water around the clock. We find which part is leaking, the flapper, the fill valve, a Kohler canister seal or a dual-flush seal, and replace it with the right one for your toilet. We repair pressure-assist toilets too.

    Running Toilet Repair

    About This Service

    There are two ways water escapes a toilet tank, and a quick look tells you which. If water is spilling into the overflow tube, the fill valve is set too high or isn't shutting off. If it's slipping past the flapper or seal into the bowl, the seal is worn, warped or dirty. The EPA's test for the second one is simple: put a few drops of food coloring in the tank, wait 10 minutes without flushing, and if color shows up in the bowl, it's leaking. A toilet that refills on its own every so often, sometimes called a phantom or ghost flush, is the same leak. The EPA notes a worn flapper can silently leak thousands of gallons a year.

    The right part matters. Flappers come in 2-inch and 3-inch sizes, and Korky's rule of thumb is that a drain opening the size of a baseball takes a 2-inch flapper while one the size of a softball takes a 3-inch. Kohler canister toilets and dual-flush toilets don't use a flapper at all; they need the seal made for that model. And in-tank bleach tablets are hard on all of it: Fluidmaster warns that drop-in cleaners containing bleach or chlorine damage tank parts, and TOTO says the same.

    Pressure-assist toilets work differently: a sealed vessel inside the tank holds water under pressure and releases it for a strong flush. We replace their cartridges, actuators and supply assemblies, and whole vessels. If yours is a Flushmate III, check the date code on the label on top of the unit; the Consumer Product Safety Commission has recalled Series 503 units made from October 1997 through April 2011, in recalls in 2012, 2014 and 2016, because the vessel can burst at the weld seam.

    Signs You May Need Running Toilet Repair

    • A toilet that keeps running after a flush
    • A tank that refills on its own every few minutes
    • Water trickling into the bowl, or the dye test turning the bowl colored
    • A handle you have to jiggle to stop it running
    • A weak flush or a flapper that closes too early
    • A pressure-assist toilet that hisses, runs on or leaks

    What's Included

    • Flapper replacement (2-inch, 3-inch and OEM)
    • Fill valve replacement, including Kohler and TOTO valves
    • Kohler canister seal and canister assembly replacement
    • Dual-flush tower and seal replacement
    • Complete tank rebuilds, standard and specialty
    • Pressure-assist cartridge, actuator, supply assembly and vessel replacement

    Why Choose Us

    • The right part for your toilet, not a universal guess
    • We check the whole tank so it doesn't start running again next month
    • Licensed in South Carolina and North Carolina
    • Veteran-owned local plumber in Greer

    Running Toilet Repair FAQ

    Either water is leaking past the flapper or seal into the bowl, or the fill valve is overfilling into the overflow tube. A chain with too little slack can also hold the flapper open; Korky and Kohler both call for one or two links of slack.

    Do the EPA dye test: a few drops of food coloring in the tank, wait 10 minutes. If color shows up in the bowl, the flapper or seal is leaking. Flush right after so the color doesn't stain.

    That's a slow leak from the tank into the bowl, sometimes called a ghost flush. When the water drops far enough, the fill valve tops it back up. It usually means a worn flapper or seal.

    Only if it matches your flush valve size, 2-inch or 3-inch. Kohler canister and dual-flush toilets need a seal made for that model, not a flapper.

    If it has a Flushmate III, check the 16-character date code on the label on top of the unit; the first six digits are the date it was made. CPSC's recalls (2012, 2014 and 2016) together cover Series 503 units made October 1997 through April 2011. Call 864-279-4461 and we'll check it with you.

    Ready to get started?

    Call us now or request a free quote — we respond within minutes.

    864-279-4461